Product display

Inheriting the classics and building the future with wisdom;


Service Hotline:


Bearing straight-edge grinding machine

Product Details

Machine introduction
The machine adopts PLC control, chamfer and bottom edge of a one-time polishing, two sets of front chamfer pendulum can be freely oscillated between 0 ° ~ 45 ° and 0 ° ~ 60 °, and in the processing of straight edges, multiple edges, beveled edges can be molded at one time, the angle and chamfer width are displayed on the touch display, and the parameters of the front chamfer can be adjusted and set more accurately when automatic grinding.
The machine also adopts rolling friction without chain drive front and rear pressure transfer plate, high processing efficiency, good effect (processing finish close to the parent finish), wide processing range, simple and convenient operation.
Technical parameter
Grinding speed: 1~10m/min
Grinding thickness: 3mm~30mm
Total weight: 6000kg
Minimum glass width: 50X50mm
MAX.Bevel Width: 25kw
Total power: 30kw
Base Dimensions: 8.6mx1.2mx2.7m

Copyright ? 2022 Foshan Gaoming Zhengxing Electromechanical Co., Ltd. All rights reserved